Call 01444 247020 to find your nearest stockist or request a callback 

110W Heating Mats

110W heating mats are the ideal choice for energy-efficient and
well-insulated properties where a lower output system is required.

110W Underfloor Heating Mats

Our 110W/sqm electric underfloor heating mats are ideal for very well insulated properties or developments with a lower power requirement.

110W mats are often used in energy-efficient new builds, Passivhaus properties or eco homes where a low output system will easily heat rooms. 110W mats can be used as sole source heating or support other forms of heating in a property.

110W heating mats are economical to run over larger areas due to their lower power consumption. And a lower output system reduces the likelihood of problems caused by thermal blocks.

Heat Mat Underfloor Heating Mat

What are the benefits of installing 110W/sqm underfloor heating mats?

  • Cost effective solution for energy efficient homes
  • Lower power consumption required
  • Lower loading required
  • Easy-to-install
  • Low running costs
  • Designed and made in Denmark
  • Covered by our lifetime warranty

Heat Mat's relaible and high-quality underfloor heating mats react faster and cost less to run than lower powered alternatives, when used with an intelligent thermostat timer.

For more information or a quote please contact us. 

Selecting the correct sized heating mats

To start with you will need to calculate the Free Floor Area (FFA). To calculate the FFA you should measure the room to find out the total floor area. You should then subtract from this any areas where kitchen or bathroom furniture will be placed, or where furniture without an air gap beneath it will be positioned. Once you have taken off these areas you have your FFA. For rooms of up to 8m2, we recommend choosing a combination of heating mats which cover roughly 90% of your FFA, and for rooms larger than 8m2 we recommend covering around 95% of the FFA.

Combining multiple units

110W heating mats are designed to be laid together with other 110W mats to ensure the perfect fit every time. The mats are wired into the thermostat or junction box in parallel, but it is important to ensure that any other mats used in the same room are also rated at 110W/sqm.

Simple and speedy installation

Heat Mat electric underfloor heating mats are incredibly simple to install, and in large areas can take one third of the time a loose heating cable would take to fit. The mats can be cut and turned to ensure that they fit the room perfectly, and for particularly complicated areas the cable can be stripped from the mat and laid as a loose cable. The mats readily affix to the floor with four strips of double-sided tape, and the strong fibreglass mesh above the cable ensures it is protected during tiling.

Approved and guaranteed

Heat Mat’s electric underfloor heating mats are independently BEAB and Semko approved, manufactured in Denmark in our BEAB approved factory, and supplied with a Lifetime Warranty. They are Semko certified as having a very low EMC radiation, which is a result of their twin conductor design and 100% aluminium earth shield.

Technical Data for 110W Heating Mats

  • General Construction: Dual conductor wire with earth
  • Supply Voltage: 240V
  • Power Output: 110W/sqm
  • Output Range for 110W mats: 120W-1250W
  • Maximum Load: 14W/m
  • Standard Range: 1.1m2 - 11.5m2
  • Mat Dimensions: 0.5m wide x 2.2m to 23m
  • Maximum Cable Temperature: 90 °C
  • Approvals: CE Marked and BEAB system approved
  • Wire Thickness: 2.7mm to 3.2mm depending on Ohm Value
  • Cable Flexibility: Minimum allowable cable radius is 18mm
  • Approved in accordance with: EN 60335-1:1998, EN60335-2-17:1999, IEC 60730
  • IP Rating: IPX7

Construction

  • Thermal Conductor: 2 x resistance wire insulated with fluoropolymer (FEP 7Y) tested to 200°C
  • Outer Insulation: PVC (Y) tested to 90°C
  • Coldtail Lead: 2m double insulated cable
  • Earth Protection: 100% aluminium earth shield
  • Reinforcement Materials: Fibreglass wire
  • Reinforcement Mesh: Fibreglass mesh
  • Fixing Material: 4 rows of double sided tape
  • Reinforcement Mesh: Fibreglass mesh

110 W/m2 Mat Product Codes and Sizes 

Product Code                 Size (mLength (m) Width (m) Wattage Resistance 
PKM-110-0110 1.1 m2 2.2 m 0.5 m 120 W 493 Ω
PKM-110-0140 1.4 m2 2.8 m 0.5 m 150 W 374 Ω
PKM-110-0200 2.0 m2 4.0 m 0.5 m 220 W 257 Ω
PKM-110-0310 3.1 m2 6.0 m 0.5 m 320 W 181 Ω
PKM-110-0410 4.1 m2 8.12 m 0.5 m 450 W 129 Ω
PKM-110-0490 4.9 m2 9.8 m 0.5 m 540 W 106 Ω
PKM-110-0580 5.8 m2 11.6 m 0.5 m 660 W 88 Ω
PKM-110-0700 7.0 m2 14.0 m 0.5 m 770 W 75 Ω
PKM-110-0830 8.3 m2 16.6 m 0.5 m 930 W 62 Ω
PKM-110-0900 9.0 m2 18.0 m 0.5 m 1020 W 56 Ω
PKM-110-0120 10.2m2 20.4 m 0.5 m 1090 W 53 Ω
PKM-110-1150 11.5m2 23.0 m 0.5 m 1250 W 46 Ω 

Heating Mat Technical Specifications

From Area to Ohms. All you need to know.

Heating Mat Installation Guide

Diagrams showing how to install our Heatmats.

Preparing your floor

Instructions on how to prepare your floor.

Different floor construction options

How our heating mats can be constructed.