Call 01444 247020 to find your nearest stockist or request a callback 

TPS Manual Thermostat

TPS30 On/Off manual thermostat.

TPS30 Manual Thermostat

Heat Mat's TPS30 thermostat is an easy-to-operate manual controller, suitable for use with any Heat Mat Underfloor Heating system. The TPS thermostat monitors both room and floor temperature.

Simple up and down arrows allow the temperature to be set and adjusted as desired. The TPS30 also features night setback and frost protection settings. The TPS30 can be set for room temperature control or floor temperature control, depending on the required function, and a minimum or maximum temperature can be set from 0 - 40oC.

  • Easy-to-use on/off control - the red button increases the temperature and the blue button decreases it
  • Simple to install
  • Designed for UK back boxes - can be flush mounted in a standard wall socket
  • 3m floor sensor (extendable to 100m)
  • Digital display
  • Temperature range 
  • IP21 rated
  • 16Amp, 3600W
  • Supplied with a 3 year warranty

TPS30 On/Off manual thermostat

TPS30 manual thermostat

  • Control: On/off manual thermostat
  • Output: 16Amp
  • Wattage: 3600W
  • Supply voltage: 230V +10/-15% 50/60Hz
  • Temperature range: +0/+40oC
  • Built-in interrupter: 2-pole, 16A
  • IP rating: IP21
  • Dimensions: 81/81mm facia and 38mm depth (including 18mm back box)

The TPS30 is manufactured by OJ Electronics in Denmark. 
OJ electronics is one of the world's leading underfloor heating control manufacturers.  

Wiring
The heating systems must always be controlled by a suitable electric underfloor heating thermostat, with floor temperature limitation. 
Heat Mat thermostats are rated to 16 Amps, and if a system exceeds this loading a suitably rated contactor should be used. The circuit must be protected by a 30mA RCD and suitably rated fuse or circuit breaker.

 

Installation and Programming Instructions

 

Simple to use timer 

The TPS manual thermostat features simple up/down temperature settings and a manual on/off control mechanism.

Control

Use the red arrow to increase the temperature and the blue arrow to decrease it.

Sensors

The TPS monitors both air and floor temperature for perfect control.  

16Amp control

Can control up to 16 Amp/3,600W of underfloor heating directly and without the need for a contractor.

Versions

The TPS is available in white or silver.

Install

The TPS is supplied with an extendable floor sensor. it is simple to fit and designed for UK back boxes. 


Further information and diagrams for the TPS thermostat can be found on the product factsheet. See link below.

Heating Mat Technical Specifications

From Area to Ohms. All you need to know.

Heating Mat Installation Guide

Diagrams showing how to install our Heatmats.

Preparing your floor

Instructions on how to prepare your floor.

Need an underfloor heating installer? 

Search our map of Heat Mat Trained Installers fitting systems in the UK.

Find an installer

Talk to us today

If you have any questions about our products, or want to find your nearest stockist, then please call us on: 01444 247020

Contact our support team